 |
ASTM B418-95 Water Heater Anode Rod , Complete Crusader Cast Engine Zinc Anodes
Ürün ayrıntıları:
| Menşe yeri: | China |
| Marka adı: | OEM |
| Sertifika: | ASTM G-97, ISO, DNV |
| Model numarası: | OEM Custom-made high quality |
Ödeme & teslimat koşulları:
| Min sipariş miktarı: | 10 Kilograms |
|---|---|
| Fiyat: | negotiable |
| Ambalaj bilgileri: | On pallet with steel bundles |
| Teslim süresi: | 1 FCL:14 Days |
| Ödeme koşulları: | L/C, D/A, D/P, T/T, Western Union, MoneyGram,PayPal |
| Yetenek temini: | 300 Metric Ton/Metric Tons per Month |
|
Detay Bilgi |
|||
| ad: | Çinko anot çubuk döküm | Malzeme: | ASTM B418-95 ABD Askeri 18001K |
|---|---|---|---|
| Uygulama: | motor güneş enerjili su deposu yağ deposu depolama tankı kondansatörü | motor için kullanılır: | Crusader Motoru Çinko CRU10335 Çinko Kapaklı (E-0) |
| kabiliyet: | NPT pirinç fiş | sertifika: | MIL özellikleri |
| Vurgulamak: | water heater rod anode,water heater anode rod replacement |
||
Ürün Açıklaması
ASTM B418-95 Water Heater Anode Rod , Complete Crusader Cast Engine Zinc AnodesEngine Zinc Anodes – Complete Crusader Engine Zinc CRU10335 Zinc w/ Plug (E-0)
Cast zinc anode rods with NPT brass plug for corrosion-protection devices such as water heaters, solar water heaters, boilers, gas heaters, Engines etc.
Produced and tested Standard : ASTM B418-95 US Military 18001K
| Elements | ASTM B418-95 US Mill 18001 K | |
| Type I (Seawater) | Type II (soil) | |
| Al % | 0.1-0.5 | <0.005 % |
| Cd % | 0.025 – 0.07 | <0.003 % |
| Fe % | <0.005 | <0.004 % |
| Pb % | <0.006 | <0.003 % |
| Cu % | <0.005 | <0.002 % |
| Others Each | <0.02 | <0.02 % |
| Other Total | <0.10 | <0.10% |
| Zn | Remaining | Balance |
| Electrochemical Characteristics | ||
| Capacity | 780 Ahr/Kg | 740 Ahr/Kg |
| Close Potential(Ag/AgCl) | -1,1 V | -1,05 V |
National Pipe Thread (NPT) is a U.S. standard for tapered threads used on threaded pipes and fittings. The taper on NPT threads allows them to form a seal when torqued.
To determine the NPT size for an engine anode’s brass plug, measure the outside diameter (OD) of the threaded section of the plug then select the corresponding NPT size from the table below.
For example, if a plug’s thread OD measures around 3/4", the corresponding NPT size is 1/2".
| NPT | Length |
| 1/2” | 6” |
| 3/4” | 7” |
| 3/8” | 2” |
| 3/8” | 3” |
| 3/8” | 1-1/2” |
| 3/8” | 1-5/8” |
| 1/4” | 2-1/2” |
| 1/4” | 3” |
| 1/4” | 1-3/4” |
Can be also customized by buyer
Contact me for more details :
Vivian Jiang
International Marketing & Sales Department Manager
-----------------------------------------------
China Hunan High Broad New Material Co.Ltd.
70 Chezhan North Road,Changsha, China 410100
Tel:+86-731-85717705 Fax:+86-731-85716569
Mobile/Whatsapp: +86-139-7488-3816
Email: vivian@hbnewmaterial.com , metal@vip.163.com
Skype: vivian.jjy
Bu ürün hakkında daha fazla bilgi edinmek istiyorum